Tag: Show Some Flare skirt

I only needed to do a few more things to finish my skirts. First up, top-stitch the waistband. I set my stitch length a little longer, and stitched about 3/16″ from the seam. I also made sure not to stitch beyond the seam where I attached the zipper. If you do, you’re not going to… Continue reading 9 skirts finished!

Warning: this post is very picture-heavy! I sewed all of the side seams in my skirt pieces, pressed them, and turned them right sides out. I also sewed the side seams in the lining pieces and a partial back seam. I measured and marked the zipper stop on the lining. This time I did not… Continue reading Lining, meet skirt

I use regular zippers for my Show Some Flare skirts, but the way they’re installed, they’re virtually “invisible.” I watched several tutorials on YouTube, because the pattern doesn’t tell you how to install a zipper, it just says to do it. I marked the location of the zipper stop on each of my skirt backs… Continue reading Zipper Installation

I spent much of this weekend making pockets. The way these are constructed are the most ingenious method I’ve ever seen. There is a video tutorial of the whole skirt making process, and it’s worth watching just to see how the pockets are created in this skirt. The first thing you do is add a… Continue reading Making pockets

Wait, what happened to steps one and two?!? Well, I already did those. Step one was washing the fabrics. This is especially important when making garments, as the cotton fabric may (and probably will) shrink when washed. Better to do that before you cut out the pieces and put them all together into a finished… Continue reading Step 3, finish fabric edges